Why Coupling Grease?
Satisfactory lubrication is vital for satisfactory gear coupling operation. Gear Coupling Grease is especially intended for gear coupling applications to increase coupling life though dramatically decreasing maintenance time. Its large viscosity base oil and tackifier combine to help keep the grease in spot and avert separation and it can be in finish compliance with NSI/AGMA 9001-B97 lubrication recommendations.
Coupling Grease is dark brown in colour and produced that has a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to substantial centrifugal forces commonly identified in couplings. Bearing or basic purpose greases often separate and eliminate effectiveness resulting from higher centrifugal forces on the numerous components at high rotational speeds. These higher centrifugal forces encountered in couplings separate the base oil from the thickeners. Hefty thickeners, which have no lubrication qualities, accumulate while in the gear tooth mesh place leading to premature coupling failure. Gear Coupling Grease is developed to extremely resistant to centrifugal separation from the oil and thickener, which allows the lubricant for being made use of for any comparatively long period of time.
One of several secrets to the good results of Gear Coupling Grease would be the variable consistency throughout the operating cycle of the application. The consistency of our gear coupling grease improvements using the working 
ailments. Operating of your lubricant below real service problems causes the grease to turn out to be semi-fluid, functionally solash lubricating the wear surfaces on the coupling. Because the grease cools, it returns to your original consistency, therefore stopping leakage.
Gear Coupling Grease is accessible from stock in 14 oz. cartridges, one lb. and 5 lb. cans.
Functions
Minimizing of coupling dress in
Resistance to water washing
Corrosion and rust safety
Substantial load carrying capabilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in spot beneath higher speeds
Resistance to centrifugal separation
Reduction in down time & servicing cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and one. This grease is specially formulated which has a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.
