DC MOTOR 
PUMP GROUP 1
Standard Description
Consisting of the heavy duty DC motor and also the CB1S gear pump, this pump motor group is an great hydraulic power unit for mobile hydraulic equipments, such as car or truck carriers, mobile aerial lifts, and backup systems.
DC MOTOR PUMP GROUP 2
Standard Description
This motor pump consists of four.5″ DC motor, a CBSR gear pump with built-in relief valve and check out valve.
DC MOTOR PUMP GROUP three
Basic Description
This motor pump consists of a 4.5″ DC motor as well as a CBSR gear pump which has a typical power up/gravity down circuit by using a relief valve, a check out valve plus a solenoid release valve.
Specific Notes
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean each of the hydraulic components concerned in advance of mounting the energy unit.
three. Viscosity with the hydraulic oil shoud be 15~68 cst, which should also be clean and free of charge of impurities. N46 hydraulic oil is encouraged.
4. The power unit really should be mounted horizontally.
5. The relief valve pressure is preset about 25% larger than the working stress.
6. Flow management valve for lowing pace adjustment is accessible unpon request.
