Warning: Declaration of ET_Theme_Builder_Woocommerce_Product_Variable_Placeholder::get_available_variations() should be compatible with WC_Product_Variable::get_available_variations($return = 'array') in /www/wwwroot/flexible-motor-coupling.top/wp-content/themes/Divi/includes/builder/frontend-builder/theme-builder/WoocommerceProductVariablePlaceholder.php on line 8
Material Handling Power UNIT manufacturer, suppliers, factory, exporters

Materials Handling Energy UNIT two
Basic Description
This energy unit functions electrical power up gravity down circuit. Activate the start out solenoid to start the motor to lift the machine. The lowing motion is activated by the solenoid valve with the lowering pace controlled through the pressure compensated flow manage valve. Items of this series could be broadly used in the sector of logistic devices including fork lift, mini lift table, etc.
Special Notes
one. The duty of this electrical power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean the many hydraulic components concerned just before mounting the energy unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst,which must also be clean and absolutely free of impurities, N46 hydraulic oil is proposed .
four. Oil shifting is required soon after the preliminary 100 operation hrs,afterwards after every 3000 hrs.
five. The power unit ought to be mounted horizontally.

Materials Managing Electrical power UNIT 1
Standard Description
This energy unit is created for that fork lift sector, consisting of really effective gear pump, DC motor, guide raise and reduced valve, tank, ect. The up and down motion are managed by the lever of the guide release valve, and that is equipped with an electric switch to activate the motor. The lowing speed is controlled through the pressure compensated flow control valve.
Particular Notes
one. The duty of this electrical power unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean the many hydraulic elements concerned just before set up of the energy unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst, which ought to also be clean and totally free of impurities, N46 hydraulic oil is suggested .
four. Oil transforming is needed soon after the original a hundred operation hours, afterwards once each 3000 hours.
five. The electrical power unit proven is made to be mounted horizontally.