Need A Customized Product?
flexible-motor-coupling
A complete range of flexible shaft couplings. Agknx engineers have many years’ experience working with and specifying shaft couplings and are very happy to offer applications advice on coupling selection.
What we do
Production, installation, Custom Builds, & More
Shaft Coupling
Shaft couplings are actually the mechanical device that connects or couples the two drive element or shaft together for transmitting the power from one end to another. Couplings do not allow any shaft interruption during operation. Anyway, with the torque limiting couplings can disconnect when the limit of the torque is exceeded.
Advantages of Shaft Coupling
• Transfer the power from one end to another end
• Provide connectivity of shaft with the other units that are manufactured such as motor and generators
• Provide shaft misalignment and mechanical flexibility
• Decreases the shock load transmission from shaft one end to another
• Provide protection against overload
• Adjust the rotating unit vibration characteristics
C-Flex couplings
Constructed using high strength hardened stainless steel or glass impregnated polyamide flexures, the couplings require no maintenance, providing years of trouble-free life, even in contaminated environments.
The use of C-Flex couplings in mechanical systems to connect rotating shafts will result in lower energy usage and bearing failure, since less stress is placed upon bearings. Misalignment forces on the bearings of a rotating system generates heat which is wasted energy.
C-Flex couplings are normally provided with two set screws aligned at 90 degrees to each other for clamping to the shaft, however, they may be provided with C-Flex patent pending progressive clamp bushings, which will allow for secure mark free clamping of the coupling to a shaft.
Flexible Motor Coupling
Flexible couplings are used to link 2 rotating shafts that are not aligned in order to transmit the rotational power, known as torque, from 1 shaft to the other.
Most flexible couplings consist of 2 hubs and 1 middle assembly; each hub attaches to a shaft while the middle assembly flexes between the hubs to accommodate the misalignment of the 2 shafts.
Shaft misalignments are generally either parallel or angular and cause complications to transmitting rotational power from 1 shaft to another in the form of stresses, loads, vibrations, and other forces, which vary from 1 type of misalignment to another.
Flexible couplings are used in a broad range of applications, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.
Solid Couplings
Our range of solid couplings (rigid couplings) are available in stainless steel or aluminium, are primarily used for connecting two accurately aligned shafts. The design of the coupling which is available in either a one or two piece construction, prevents shaft marking or the screws from loosening during operation by precision honed bores and AGKNX anti-vibration hardware. The solid coupling range provides superior torsional holding strength.
Technical features include:
Does not mark the shaft
AGKNX anti-vibration hardware supplied
Precision honed bore
The two-piece style (stainless steel type only) is balanced and easy to assemble
Flexible Disc Spring Couplings
A number of different options of flexible disc spring couplings are available, based on both single and double disc spring construction. Please note that single disc spring couplings should only be used where the misalignment between the shafts is restricted to angular and axial.Single disc spring couplings cannot be used where radial misalignments are present.
The CZPT-2213 and 3019 type uses a novel design which places the clamps inboard of the disc springs to give the shortest possible overall length. The CZPT-3850 type has an extended centre piece which allows high radial misalignment capability whilst maintaining good accuracy of transmission.
membrane coupling
Our membrane couplings are a light duty three piece constructed flexible shaft coupling with aluminium clamp hubs and an insulating reinforced fiberglass central element. The membrane coupling are an ideal compact solution for applications requiring zero backlash and electrical isolation.
Technical features include:
- Zero backlash
- Maintenance free
- Electrical isolation
- Recommended temperature range -10ºC to +80ºC
- Bore sizes 6 mm to 14 mm available
We are experienced
Flexible couplings with oil injection mounting
EP oil injection method applied to flexible shaft couplings
By combining the principle of EP oil injection method on flexible shaft couplings, a high torque interference fit for plain, cylindrical shafts is obtained.
Since there is no need for machining any keyways, splines or tapered shafts, smaller shaft diameters can be used, thus less weight.
Mounting and dismounting are fast and easy with no external tools except a pump set.
About us
Provide the best quality industrial services in the region
We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service. We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.
for more details, please check out our products catalogs and machine lists.
we staff over 1500 workers, and have cnc turning machines and cnc work centers.
we are one of the best manufacturer and supplier in china, choose quality manufacturers, suppliers, exporters at flexible-motor-coupling.top





Message Us
Get In touch below. Ask Any Question or Start a Free Quote
Call Us
(763) 724-4676
Office Location
Thon Buri, Bangkok, Thailand.
Open Hours
sales@flexible-motor-coupling.top